Scope of application
Applied to wire and cable, textile, waterproof material, non-woven fabric, safety belt, rubber, plastic, film, wire rope, steel bar, metal wire, metal foil, metal sheet and metal rod wire and other metal materials and non-metal materials and parts products for stretching, compression, bending, tearing, 90° peeling, 180° peeling, shear, adhesive force, pulling force, elongation and other tests Test, and some products special mechanical properties test.
Main functions:
1. Automatic stop: after the sample fracture, the moving beam will stop automatically;
2. Manual shift: automatically switch to the appropriate range according to the load size to ensure the accuracy of measurement data;
3. Conditional storage: test control data and sample conditions can be made into modules, convenient batch test;
4 automatic speed change: the speed of the moving beam during the test can be automatically changed according to the preset program, but also can be manually changed;
5. Automatic calibration: The system can automatically realize the calibration of the accuracy of indicating the value;
6. Automatic saving: after the test, the test data and curve will be automatically saved;
7. Process realization: the test process, measurement, display and analysis are completed by the microcomputer;
8. Batch test: for the same parameters of the sample, after one setting can be completed in sequence;
9. Test software: Chinese WINDOWS interface, menu prompt, mouse operation;
10. Display mode: dynamic display of data and curves along with the test process;
11. Curve traversal: After the test is completed, the curve can be reanalyzed, and the test data corresponding to any point on the curve can be found with the mouse;
12. Curve selection: According to the need to select stress-strain, force-displacement, force-time, displacement-time curve display and print;
13. Test report: the report can be prepared and printed according to the format required by users;
14. Limit protection: with program control and mechanical two level limit protection;
15 overload protection: When the load exceeds the maximum value of 3-5% of each gear, automatic stop
Post time: Feb-27-2023