English
banner3(1)
banner1(1)
banner2(1)

Paper&Flexible Packaging Testing Instruments

  • （China）YY174 Air Bath Heat Shrinkage Tester

    （China）YY174 Air Bath Heat Shrinkage Tester

    Instrument use:

    It can accurately and quantitatively measure the thermal shrinkage force, cold shrinkage force, and thermal shrinkage rate of plastic film in the process of thermal shrinkage. It is suitable for the accurate determination of thermal shrinkage force and thermal shrinkage rate above 0.01N.

     

    Meet the standard:

    GB/T34848,

    IS0-14616-1997,

    DIN53369-1976 

    inquirydetail
  • （China）YY ST05B Five Point Heat Seal Gradient Tester

    （China）YY ST05B Five Point Heat Seal Gradient Tester

    Introductions:

    The heat seal tester is a necessary laboratory instrument for food enterprises, pharmaceutical enterprises, daily chemical products enterprises, packaging and raw material production enterprises.

    Its working conditions simulate the pressure, temperature and time of the packaging line in the packaging process of the packaging line. Through the instrument, the material can be quickly assessed and can be used in the production line after the assessment. Another use is to heat seal the flexible packaging material under the set temperature, pressure and time, so as to conveniently and quickly

    find the best heat of the material

    Sealing process parameters to meet the requirements of packaging and packaging material manufacturers for the best heat sealing parameters of materials.

     

    II.Meeting Standard:

    QB/T 2358（ZBY 28004）、 ASTM F2029、YBB 00122003

    inquirydetail
  • (China)YY6-Light 6 Source Color Assessment Cabinet（4 Foot)

    (China)YY6-Light 6 Source Color Assessment Cabinet（4 Foot)

    1. Lamp Cabinet Performance
      1. Hepachromic artificial daylight acknowledged by CIE, 6500K color temperature.
      2. Lighting scope: 750-3200 Luxes.
      3. Background color of light source is Neutral Grey of absorbance.In using lamp cabinet, prevent outer light from projecting on article to be checked. Don`t place any unconcerned articles in the cabinet.
      4. Making metamerism test.Through microcomputer, the cabinet can switch between different light sources in very short time to check color difference of goods under different light source. When lighting up, Prevent lamp from flashing as home fluorescent lamp is lighted.
      5. Correctly record use time of each lamp group. Especially D65 standar dlamp shall be replaced after being used for over 2,000 hrs, avoiding error resulted from aged lamp.
      6. UV light source for checking articles containing fluorescent or whitening dye, or be used to add UV to D65 light source.
      7. Shop light source. Oversea clients often require other light source for color check. For example, USA clients like CWF and European and Japan clients for TL84. It`s because that goods is sold indoor and is under shop light source but not outer sun light. It`s become more and more popular to use shop light source for checking color.54
    inquirydetail
  • （China）YY6 Light 6 Source Color Assessment Cabinet

    （China）YY6 Light 6 Source Color Assessment Cabinet

    I. Descriptions

    Color Assessment Cabinet,suitable for all industries and applications where there is a need to maintain color consistency and quality-e.g. Automotive,Ceramics, Cosmetics, Foodstuffs,Footwear, Furniture, knitwear, Leather, Ophthalmic, Dyeing, Packaging, Printing, Inks and Textile.

    Since different light source has different radiant energy,when they arrive on the surface of an article,different colors display.With regard to color management in industrial production,when a checker has compared the color consistence between products and examples, but there may exist difference between light source used here and light source applied by the client.In such condition, color under different light source differs. It always brings following issues: Client makes complaint for color difference even requires for rejection of goods, seriously damaging company credit.

    To resolve the above problem,the most effective way is to check good color under same light source .For example,international Practice applies Artificial Daylight D65 as standard light source for checking goods color.

    It`s very important to use standard light source to chenk color difference in night duty.

    Besides D65 light source ,TL84,CWF, UV, and F/A light sources are available in this Lamp Cabinet for metamerism effect.

     

    inquirydetail
  • （China）YYP103A Whiteness Meter

    （China）YYP103A Whiteness Meter

    Product introduction

    Whiteness Meter/Brightness meter is widely applied in papermaking, fabric, printing, plastic,

    ceramic and porcelain enamel, construction material, chemical industry, salt making and other

    testing department that need to test whiteness. YYP103A whiteness meter also can test the

    paper’s transparency, opacity, light scatting coefficient and light absorption coefficient.

     

    Product features

    1.Test ISO whiteness (R457 whiteness) .It can also determine the fluorescent whitening degree of phosphor emission.

    2. Test of lightness tristimulus values (Y10), opacity and transparency. Test light scatting coefficient

    and light absorption coefficient.

    3. Simulate D56. Adopt CIE1964 supplement color system and CIE1976 (L * a * b *) color space color difference formula. Adopt d / o observing geometry lighting conditions. The diameter of diffusion ball is 150mm. The diameter of test hole is 30mm or 19mm. Eliminate the sample mirror reflected light by

    light absorbers.

    4. Fresh appearance and compact structure; Guarantee the accuracy and stability of measured

    data with advanced circuit design.

    5. LED display; Prompt operation steps with Chinese. Display statistical result. Friendly man-machine interface makes the operation simple and convenient.

    6. Instrument is equipped with a standard RS232 interface so it can cooperate with the microcomputer software to communicate.

    7. Instruments have a power-off protection; the calibration data is not lost when the power is cut off.

    inquirydetail
  • (China)YYP-PL Tissue Tensile Strength Tester –Pneumatic type

    (China)YYP-PL Tissue Tensile Strength Tester –Pneumatic type

    1. Product Description

    The tisse tensile tester YYPPL is a basic instrument for testing the physical properties of materials

    such as tension, pressure (tensile). The vertical and multi-column structure is adopted, and the

    chuck spacing can be arbitrarily set within a certain range. The stretching stroke is large, the

    running stability is good, and the test accuracy is high. The tensile testing machine is widely

    used in fiber, plastic, paper, paper board, film and other non-metallic materials top pressure, soft

    plastic packaging heat sealing strength, tearing, stretching, various puncture, compression,

    ampoule breaking force, 180 degrees peel, 90 degrees peel, shear force and other test projects.

    At the same time, the instrument can measure paper tensile strength, tensile strength,

    elongation, breaking length, tensile energy absorption, tensile finger

    Number, tensile energy absorption index and other items. This product is suitable for medical,

    food, pharmaceutical, packaging, paper and other industries.

     

     

     

     

     

     

     

    1. Product Features:
      1. The design method of the imported instrument clamp is adopted to avoid the detection error caused by the operator because of the operation technical problems.
      2. Imported customized high sensitivity load element, imported lead screw to ensure accurate displacement
      3. Can be arbitrarily selected in the speed range of 5-600mm/min, this function can meet the 180° peel, ampoule bottle breaking force, film tension and other samples detection.
      4. With tensile force, plastic bottle top pressure test, plastic film, paper elongation, breaking force, paper breaking length, tensile energy absorption, tensile index, tensile energy absorption index and other functions.
      5. The motor warranty is 3 years, the sensor warranty is 5 years, and the whole machine warranty is 1 year, which is the longest warranty period in China.
      6. Ultra-long travel and large load (500 kg) structure design and flexible sensor selection facilitate the expansion of multiple test projects.

     

     

    1. Meeting standard:

    TAPPI T494、ISO124、ISO 37、GB 8808、GB/T 1040.1-2006、GB/T 1040.2-2006、GB/T 1040.3-2006、GB/T 1040.4-2006、GB/T 1040.5-2008、GB/T 4850- 2002、 GB/T 12914-2008、GB/T 17200、 GB/T 16578.1-2008、 GB/T 7122、 GB/T 2790、GB/T 2791、GB/T 2792、GB/T 17590、 GB 15811、ASTM E4、ASTM D882、ASTM D1938、 ASTM D3330、ASTM F88、 ASTM F904、JIS P8113、 QB/T 2358、 QB/T 1130 、 YBB332002-2015 、YBB00172002-2015 、YBB00152002-2015

     

    inquirydetail
  • （China）YYP-PL Trouser Tearing Tensile Strength Tester

    （China）YYP-PL Trouser Tearing Tensile Strength Tester

    1. Product Description

    The Trouser  Tearing Tensile Strength Tester is a basic instrument for testing the physical properties

    of materials such as tension, pressure (tensile). The vertical and multi-column structure is adopted,

    and the chuck spacing can be arbitrarily set within a certain range. The stretching stroke is large, the running stability is good, and the test accuracy is high. The tensile testing machine is widely used in fiber, plastic, paper, paper board, film and other non-metallic materials top pressure, soft plastic packaging heat sealing strength, tearing, stretching, various puncture, compression, ampoule

    breaking force, 180 degrees peel, 90 degrees peel, shear force and other test projects. At the same time, the instrument can measure paper tensile strength, tensile strength, elongation, breaking

    length, tensile energy absorption, tensile finger

    Number, tensile energy absorption index and other items. This product is suitable for medical, food, pharmaceutical, packaging, paper and other industries.

     

     

    1. Product Features:
      1. The design method of the imported instrument clamp is adopted to avoid the detection
      2. error caused by the operator because of the operation technical problems.
      3. Imported customized high sensitivity load element, imported lead screw to ensure accurate displacement
      4. Can be arbitrarily selected in the speed range of 5-600mm/min, this function can
      5. meet the 180° peel, ampoule bottle breaking force, film tension and other samples detection.
      6. With tensile force, plastic bottle top pressure test, plastic film, paper elongation,
      7. breaking force, paper breaking length, tensile energy absorption, tensile index,
      8. tensile energy absorption index and other functions.
      9. The motor warranty is 3 years, the sensor warranty is 5 years, and the whole machine warranty is 1 year, which is the longest warranty period in China.
      10. Ultra-long travel and large load (500 kg) structure design and flexible sensor selection facilitate the expansion of multiple test projects.

     

     

    1. Meeting standard:

    ISO 6383-1、GB/T 16578、ISO 37、GB 8808、GB/T 1040.1-2006、GB/T 1040.2-2006、

    GB/T 1040.3-2006、GB/T 1040.4-2006、GB/T 1040.5-2008、GB/T 4850- 2002、 GB/T 12914-2008、GB/T 17200、 GB/T 16578.1-2008、 GB/T 7122、 GB/T 2790、GB/T 2791、GB/T 2792、

    GB/T 17590、 GB 15811、ASTM E4、ASTM D882、ASTM D1938、 ASTM D3330、ASTM F88、 ASTM F904、JIS P8113、 QB/T 2358、 QB/T 1130 、 YBB332002-2015 、YBB00172002-2015 、YBB00152002-2015

     

    inquirydetail
  • （China）YYP-A6 Packaging Pressure Tester

    （China）YYP-A6 Packaging Pressure Tester

    Instrument use:

    Used to test food package (instant noodle sauce package, ketchup package, salad package,

    vegetable package, jam package, cream package, medical package, etc.) need to do static

    pressure test. 6 finished sauce packs can be tested at a time. Test item: Observe the

    leakage and damage of the sample under fixed pressure and fixed time.

     

    Working principle of instrument:

    The device is controlled by touch microcomputer, through adjusting the pressure reducing

    valve to make the cylinder reach the expected pressure, the microcomputer timing, control

    the reversing of the solenoid valve, control the up and down action of the sample pressure

    plate, and observe the sealing condition of the sample under a certain pressure and time.

    inquirydetail
  • （China）YYP112-1 Halogen Moisture Meter

    （China）YYP112-1 Halogen Moisture Meter

    Standard:

    AATCC 199  Drying time of Textiles : Moisture Analyzer Method

    ASTM D6980 Standard Test Method for Determinaton of Moisture in Plastics by Loss in Weight

    JIS K 0068 Test Methods foe water content of chemical products

    ISO 15512 Plastics – Determination of water content

    ISO 6188 Plastics – Poly(alkylene  terephthalate) granules – Determination of water content

    ISO 1688 Starch – Determination of moisture content – Oven-drying methods

    inquirydetail
  • (China)YYP112B Waste Paper Moisture Meter

    (China)YYP112B Waste Paper Moisture Meter

    （Ⅰ）Application:

    YYP112B Waste paper moisture meter permits to measure the moisture content of waste paper, straw and grass quickly using the advanced technology of electromagnetic waves. It also has the characteristics of wide moisture content scope, small cubage, light weight and simple operation.  

    （Ⅱ）TECHNICAL DATES：

    ◆Measuring Range：0~80%

    ◆Repetition Accuracy：±0.1%

    ◆Display time：1 second

    ◆Temperature Range：－5℃～＋50℃

    ◆Power Supply：9V （6F22）

    ◆Dimension：160mm×60mm×27mm  

    ◆Probe length:600mm

    inquirydetail
  • （China）YYP111B Folding Resistance Tester

    （China）YYP111B Folding Resistance Tester

    Overview:

    MIT folding resistance is a new type of instrument developed by our company according to the

    national standard GB/T 2679.5-1995 (determination of folding resistance of paper and paperboard).

    The instrument has the parameters included in the standard test, conversion, adjustment, display,

    memory, printing, with data processing function, can directly obtain the statistical results of the data.

    The instrument has the advantages of compact structure, small size, light weight, full function,

    bench position, easy operation and stable performance, and is suitable for the determination of

    bending resistance of various paperboards.

    inquirydetail
  • （China）YYP 501B Automatic Smoothness Tester

    （China）YYP 501B Automatic Smoothness Tester

    YYP501B Automatic smoothness tester is a special instrument for determining the smoothness of paper. According to the international general Buick (Bekk) type smoother working principle design. In mechanical design, the instrument eliminates the manual pressure structure of the traditional lever weight hammer, innovatively adopts CAM and spring, and uses synchronous motor to automatically rotate and load the standard pressure. Greatly reduce the volume and weight of the instrument. The instrument uses a 7.0 inch large color touch LCD screen display, with Chinese and English menus. The interface is beautiful and friendly, the operation is simple, and the test is operated by one key. The instrument has added an “automatic” test, which can greatly save time when testing high smoothness. The instrument also has the function of measuring and calculating the difference between two sides. The instrument adopts a series of advanced components such as high-precision sensors and original imported oil-free vacuum pumps. The instrument has various parameter testing, conversion, adjustment, display, memory and printing functions included in the standard, and the instrument has powerful data processing capabilities, which can directly obtain the statistical results of the data. This data is stored on the main chip and can be viewed with a touch screen. The instrument has the advantages of advanced technology, complete functions, reliable performance and easy operation, and is an ideal test equipment for papermaking, packaging, scientific research and product quality supervision and inspection industries and departments.

    inquirydetail
  • （China）YYP123C Box Compression Tester

    （China）YYP123C Box Compression Tester

    Instruments features:

    1.After the completion of the test automatic return function, automatically judge the crushing force

    and automatically save the test data

    2. Three kinds of speed can be set, all Chinese LCD operation interface, a variety of units to

    choose from.

    3.Can input the relevant data and automatically convert the compressive strength, with

    packaging stacking test function; Can directly set the force, time, after the completion of

    the test automatically shut down.

    4. Three working modes:

    Strength test: can measure the maximum pressure resistance of the box;

    Fixed value test: the overall performance of the box can be detected according to the set pressure;

    Stacking test: According to the requirements of national standards, stacking tests can be carried

    out under different conditions such as 12 hours and 24 hours.

     

    III.Meet the standard:

    GB/T 4857.4-92 Pressure test method for packaging transportation packages

    GB/T 4857.3-92 Test method for static load stacking of packaging and transportation packages.

    inquirydetail
  • （China）YYP111A Folding Resistance Tester

    （China）YYP111A Folding Resistance Tester

    1. Applications:

    The folding resistance tester is a test tool used to test the folding fatigue performance of thin

    materials such as paper, through which the folding resistance and folding resistance can be tested.

     

    II.Range of Application

    1.0-1mm paper, cardboard, cardboard

    2.0-1mm glass fiber, film, circuit board, copper foil, wire, etc

     

    III.Equipment characteristics:

    1.High closed loop stepper motor, rotation Angle, folding speed accurate and stable.

    2.ARM processor, improve the corresponding speed of the instrument, the calculation data is

    accurate and fast.

    3.Automatically measures, calculates and prints test results, and has the function of data saving.

    4.standard RS232 interface, with microcomputer software for communication (purchased separately).

     

    IV. Meeting Standard:

    GB/T 457，QB/T1049，ISO 5626，ISO 2493 

    inquirydetail
  • （China）YY311-AE3 Water Vapor Permeability Tester (Electrolytic method)

    （China）YY311-AE3 Water Vapor Permeability Tester (Electrolytic method)

    Testing application

    Basic application

    Films

    		 Water vapor permeability test of various plastic film, plastic composite film, paper-plastic composite film, co-extrusion film, aluminized film, aluminum foil composite film, glass fiber aluminum foil composite film and other membrane materials.

    Sheets

    		 Water vapor permeability test of PP sheet, PVC sheet, PVDC sheet, metal foil sheet, film sheet, silicon sheet and other sheet materials.

    Paper, board and composite materials

    		 Water vapor permeability test of cigarette coated paper, paper aluminum – plastic composite sheet and other paper and board.

    Packaging

    		 Water vapor permeability test of bottles, Coke bottles, peanut oil drums, Tetra Pak packaging, vacuum packaging bags, three-piece cans, cosmetics packaging, toothpaste hose, jelly cups, yogurt cups and other plastic, rubber, paper, paper composite, glass, metal materials of bottles, bags, cans, boxes, barrels.

    Expanding applicatoin

    Package seal

    		 Water vapor permeability test of various vessel caps.

    LCD

    		 Water vapor permeability test of LCD screen and related films.

    Solar energy backplane

    		 Water vapor permeability test of solar backplane and related materials.

    Tubes

    		 Water vapor permeability test of PPR and other tubes.

    Pharmaceutical blister

    		 Water vapor permeability test of pharmaceutical blisters.

    Sterile wound protection film, medical plaster patch

    		 Water vapor permeability test of sterile wound protection films and medical plaster patches.

    Cellpacking

    		 Water vapor permeability test of cellpacking.
    inquirydetail
  • （China）YY310-D3 Oxygen Permeability Tester (Coulometry)

    （China）YY310-D3 Oxygen Permeability Tester (Coulometry)

    It is suitable for oxygen and water vapor permeability of high barrier materials such as plastic film, aluminum foil plastic film, waterproof material and metal foil. Expandable test bottles, bags and

    other containers are available.

    inquirydetail
  • （China）YY-ST01B Heat Sealing Tester

    （China）YY-ST01B Heat Sealing Tester

    Instruments features:

    1. Digital display of control system, full automation of equipment

    2. Digital P.I.D. temperature control, high temperature control accuracy

    3. Selected hot sealing knife material and customized heating pipe, the heat sealing surface temperature is uniform

    4. Single cylinder structure, internal pressure balance mechanism

    5. High precision pneumatic control components, a full set of international well-known brands

    6. Anti-hot design and leakage protection design, safer operation

    7. Well-designed heating element, uniform heat dissipation, long service life

    8. Automatic and manual two working modes, can achieve efficient operation

    9. According to the principle of ergonomics, the operation panel is specially optimized for convenient operation

    inquirydetail
  • (China)YYP134B Leak Tester

    (China)YYP134B Leak Tester

    YYP134B Leak tester is suitable for leak test of flexible packaging in food, pharmaceutical,

    daily chemical, electronics and other industries. The test can effectively compare and evaluate

    the sealing process and sealing performance of flexible packaging, and provide scientific basis

    for determining relevant technical indexes. It can also be used to test the sealing performance

    of the samples after the drop and pressure test. Compared with the traditional design, the

    intelligent test is realized: the preset of multiple test parameters can greatly improve the

    detection efficiency; the test mode of increasing pressure can be used to quickly obtain the

    sample leakage parameters and observe the creep, fracture and leakage of the sample under

    the stepped pressure environment and different holding time. Vacuum attenuation mode is

    suitable for automatic sealing detection of high value content packaging in vacuum environment.

    Printable parameters and test results (optional for printer).

    inquirydetail
  • （China）YYP114D Double Edged Sample Cutter

    （China）YYP114D Double Edged Sample Cutter

    Applications

    Adhesives, Corrugated, Foils/Metals, Food Testing, Medical, Packaging,

    Paper, Paperboard, Plastic Film, Pulp, Tissue, Textiles

    inquirydetail
  • （China）YYP107B Paper Thickness Tester

    （China）YYP107B Paper Thickness Tester

    Application Range

    Paper Thickness Tester is suitable for Various papers under 4mm

    Executive Standard

    GB451·3

    inquirydetail
<< < Previous 12345 Next > >> Page 2 / 5
Hit enter to search or ESC to close