Plastic Testing Instruments
-
YYP-22D2 Izod Impact Tester
It is used to determine the impact strength (Izod) of non-metallic materials such as rigid plastics, reinforced nylon, glass fiber reinforced plastic, ceramics, cast stone, plastic electrical appliances, insulating materials, etc. Each specification and model has two types: electronic type and pointer dial type: the pointer dial type impact testing machine has the characteristics of high precision, good stability and large measurement range; the electronic impact testing machine adopts the circular grating angle measurement technology, except for In addition to all the advantages of the pointer dial type, it can also digitally measure and display the breaking power, impact strength, pre-elevation angle, lift angle, and the average value of a batch; it has the function of automatic correction of energy loss, and can store 10 sets of historical data information. This series of testing machines can be used for Izod impact tests in scientific research institutions, colleges and universities, production inspection institutes at all levels, material production plants, etc.
-
YYP-252 High Temperature Oven
Adopts the side heat forced hot air circulation heating, the blowing system adopts the multi-blade centrifugal fan, has the characteristics of large air volume, low noise, uniform temperature in the studio, stable temperature field, and avoids the direct radiation from the heat source, etc. There is a glass window between the door and the studio for the observation of the working room. The top of the box is provided with an adjustable exhaust valve, whose opening degree can be adjusted. The control system is all concentrated in the control room on the left side of the box, which is convenient for inspection and maintenance. The temperature control system adopts digital display adjuster to control the temperature automatically, the operation is simple and intuitive, the temperature fluctuation is small, and has the over-temperature protection function, the product has good insulation performance, the use of safe and reliable.
-
-
YYP-SCX-4-10 Muffle Furnace
Overview: Can be used for the determination of ash content
SCX series energy-saving box type electric furnace with imported heating elements, furnace chamber adopts alumina fiber, good heat preservation effect, energy saving more than 70%. Widely used in ceramics, metallurgy, electronics, medicine, glass, silicate, chemical industry, machinery, refractory materials, new material development, building materials, new energy, nano and other fields, cost-effective, in the leading level at home and abroad.
Technical Parameters:
1. Temperature control accuracy: ±1℃.
2. Temperature control mode: SCR imported control module, microcomputer automatic control. Color liquid crystal display, real-time record temperature rise, heat preservation, temperature drop curve and voltage and current curve, can be made into tables and other file functions.
3. Furnace material: fiber furnace, good heat preservation performance, thermal shock resistance, high temperature resistance, rapid cooling and rapid heat.
4. Furnace shell: the use of new structure process, the overall beautiful and generous, very simple maintenance, furnace temperature close to room temperature.
5. The highest temperature: 1000℃
6.Furnace specifications (mm) : A2 200×120×80 (depth × width × height)(can be customized)
7.Power supply power: 220V 4KW
-
YYP-QKD-V Electric Notch Prototype
Summary:
The electric notch prototype is specially used for the impact test of cantilever beam and simply supported beam for rubber, plastic, insulating material and other nonmetal materials.This machine is simple in structure, easy to operate, fast and accurate, it is the supporting equipment of the impact testing machine.It can be used for research institutions, quality inspection departments, colleges and universities and production enterprises to make gap samples.
Standard:
ISO 179—2000、ISO 180—2001、GB/T 1043-2008、GB/T 1843—2008.
Technical Parameter:
1. Table Stroke：＞90mm
2. Notch type: According to tool specification
3. Cutting tool parameters：
Cutting Tools A：Notch size of the sample: 45°±0.2° r=0.25±0.05
Cutting Tools B：Notch size of the sample:45°±0.2° r=1.0±0.05
Cutting Tools C：Notch size of the sample:45°±0.2° r=0.1±0.02
4. Outside Dimension：370mm×340mm×250mm
5. Power Supply：220V，single-phase three wire system
6、Weight：15kg
-
(China)YYP122A Haze Meter
It is a kind of small hazer meter designed according to GB2410—80 and ASTM D1003—61(1997).
-
YYP–HDT VICAT TESTER
The HDT VICAT TESTER is used to determine Heating deflection and Vicat softening temperature of the plastic, rubber etc. thermoplastic , It is widely used in the production, research and teaching of plastic raw materials and products. The series of instruments are compact in structure, beautiful in shape, stable in quality, and have the functions of discharging odor pollution and cooling. Using advanced MCU (multi-point micro-control unit) control system, automatic measurement and control of temperature and deformation, automatic calculation of test results, can be recycled to store 10 sets of test data. This series of instruments have a variety of models to choose from: automatic LCD display, automatic measurement; micro-control can connect computers, printers, controlled by computers, test software WINDOWS Chinese (English) interface, with automatic measurement, real-time curve, data storage, printing and other functions.
Technical parameter
1. Temperature control range: room temperature to 300 degrees centigrade.
2. heating rate: 120 C /h [(12 + 1) C /6min]
50 C /h [(5 + 0.5) C /6min]
3. maximum temperature error: + 0.5 C
4. deformation measurement range: 0 ~ 10mm
5. maximum deformation measurement error: + 0.005mm
6. the accuracy of deformation measurement is: + 0.001mm
7. sample rack (test station):3, 4, 6 (optional)
8. support span: 64mm, 100mm
9. the weight of the load lever and the pressure head (needles): 71g
10. heating medium requirements: methyl silicone oil or other media specified in the standard (flash point greater than 300 degrees Celsius)
11. cooling mode: water below 150 degrees Celsius, natural cooling at 150 C.
12. has upper limit temperature setting, automatic alarm.
13. display mode: LCD display, touch screen
14. The test temperature can be displayed, the upper limit temperature can be set, the test temperature can be automatically recorded, and the heating can be stopped automatically after the temperature reaches the upper limit.
15. deformation measurement method: special high-precision digital dial gauge + automatic alarm.
16. It has an automatic smoke removal system, which can effectively inhibit the smoke emission and maintain a good indoor air environment at all times.
17. power supply voltage: 220V + 10% 10A 50Hz
18. heating power: 3kW
-
YYP-QCP-25 Pneumatic Punching Machine
Product introduction
This machine is used by rubber factories and scientific research units to punch standard rubber test pieces and PET and other similar materials before the tensile test. Pneumatic control, easy to operate, fast and labor-saving.
Technical Parameters
1. Maximum stroke: 130mm
2. Workbench size: 210*280mm
3. Working pressure: 0.4-0.6MPa
4. Weight: about 50Kg
5. Dimensions: 330*470*660mm
The cutter can be roughly divided into a dumbbell cutter, a tear cutter, a strip cutter, and the like (optional).
-
YYP-JC Simple Beam Impact Testing Machine
Technical Parameter
1. Energy Range: 1J, 2J, 4J, 5J
2. Impact velocity: 2.9m/s
3. Clamp span: 40mm 60mm 62 mm 70mm
4. Pre-poplar angle: 150 degrees
5. Shape size: 500 mm long, 350 mm wide and 780 mm high
6. Weight: 130kg (including attachment box)
7. Power supply: AC220 + 10V 50HZ
8. Working environment: in the range of 10 ~35 ~C, the relative humidity is less than 80%. There is no vibration and corrosive medium around.
Model/Function Comparison of Series Impact Testing MachinesModel Impact energy Impact velocity Display measure JC-5D Simply supported beam 1J 2J 4J 5J 2.9m/s Liquid crystal Automatic JC-50D Simply supported beam 7.5J 15J 25J 50J 3.8m/s Liquid crystal Automatic