Products
-
YY-10A Dry Washing Machine
Used for the determination of appearance color and size change of all kinds of non-textile and hot adhesive interlining after being washed by organic solvent or alkaline solution.
-
YYP135 Falling Dart Impact Tester
YYP135 Falling Dart Impact Tester is applicable in the impact result and energy measurement of the falling dart from a certain height against plastic films and sheets with thickness less than 1mm, which would result in 50% tested specimen failure.
-
YY-L1A Zipper Pull Light Slip Tester
Used for metal, injection molding, nylon zipper pull light slip test.
-
YY001F Bundle Fiber Strength Tester
Used for testing the breaking strength of flat bundle of wool, rabbit hair, cotton fiber, plant fiber and chemical fiber.
-
YY212A Far Infrared Emissivity Tester
Used for all kinds of textile products, including fibers, yarns, fabrics, nonwovens and other products, using the method of far infrared emissivity to determine the far infrared properties.
-
(China)YY-SW-12G-Color fastness to washing tester
[Scope of application]
It is used for testing the colour fastness to washing, dry cleaning and shrinkage of various textiles, and also for testing the colour fastness to washing of dyes.
[Relevant standards]
AATCC61/1A /2A/3A/4A/5A, JIS L0860/0844, BS1006, GB/T5711,
GB/T3921 1/2/3/4/5, ISO105C01 02/03/04/05/06/08, DIN, NF, CIN/CGSB, AS, etc.
[Instrument characteristics]
1. 7 inch multi-functional color touch screen control, easy to operate;
2. Automatic water level control, automatic water intake, drainage function, and set to prevent dry burning function;
3. High-grade stainless steel drawing process, beautiful and durable;
4. With door touch safety switch and check mechanism, effectively prevent scald, rolling injury;
5. The imported industrial MCU control temperature and time, the configuration of “proportional integral (PID)”
Adjust function, effectively prevent temperature “overshoot” phenomenon, and make the time control error ≤±1s;
6. Solid state relay control heating tube, no mechanical contact, stable temperature, no noise, life Life is long;
7. Built-in a number of standard procedures, direct selection can be automatically run; And support program editing to save
Storage and single manual operation to adapt to different methods of standard;
8. The test cup is made of imported 316L material, high temperature resistance, acid and alkali resistance, corrosion resistance;
9. Bring your own water bath studio.
[Technical parameters]
1. Test cup capacity: 550ml (φ75mm×120mm) (GB, ISO, JIS and other standards)
1200ml (φ90mm×200mm) [AATCC standard (selected)]
2. Distance from the center of the rotating frame to the bottom of the test cup: 45mm
3. Rotation speed
40±2)r/min4. Time control range: 9999MIN59s
5. Time control error: < ±5s
6. Temperature control range: room temperature ~ 99.9℃
7. Hemperature control error: ≤±1℃
8. Heating method: electric heating
9. Heating power: 9kW
10. Water level control: automatic into, drainage
11. 7 inch multi-functional color touch screen display
12. Power supply: AC380V±10% 50Hz 9kW
13. Overall size
1000×730×1150)mm14. Weight: 170kg
-
YYP-500BS Differential scanning calorimeter
The DSC is a touch screen type, specially testing polymer material oxidation induction period test, customer one-key operation, software automatic operation.
-
YY611B02 Air-cooled Climatic Colour Fastness Tester
Used for light fastness, weather fastness and light aging test of non-ferrous materials such as textile, printing and dyeing, clothing, automobile interior accessories, geotextile, leather, wood-based panel, wood floor, plastic etc. By controlling the light irradiance, temperature, humidity, rain and other items in the test chamber, the simulated natural conditions required by the experiment are provided to test the sample’s color fastness to light and weather resistance and light aging performance. With on-line control of light intensity; Light energy automatic monitoring and compensation; Temperature and humidity closed loop control; Blackboard temperature loop control and other multi-point adjustment functions. In line with American, European and national standards.
-
(china)YY571D Friction Fastness Tester (Electric)
Used in textile, hosiery, leather, electrochemical metal plate, printing and other industries to evaluate the color fastness friction test
-
YYP-QCP-25 Pneumatic Punching Machine
Product introduction
This machine is used by rubber factories and scientific research units to punch standard rubber test pieces and PET and other similar materials before the tensile test. Pneumatic control, easy to operate, fast and labor-saving.
Technical Parameters
1. Maximum stroke: 130mm
2. Workbench size: 210*280mm
3. Working pressure: 0.4-0.6MPa
4. Weight: about 50Kg
5. Dimensions: 330*470*660mm
The cutter can be roughly divided into a dumbbell cutter, a tear cutter, a strip cutter, and the like (optional).
-
YY172B Fiber Hastelloy Slicer
This instrument is used to cut the fiber or yarn into very small cross-sectional slices to observe its organizational structure.
-
(China)YY085A Fabric Shrinkage Printing Ruler
Used for printing marks during shrinkage tests.
-
(China)YY(B)631-Perspiration color fastness tester
[Scope of application]
It is used for the color fastness test of sweat stains of all kinds of textiles and the determination of the color fastness to water, sea water and saliva of all kinds of colored and colored textiles.
[Relevant standards]
Perspiration resistance: GB/T3922 AATCC15
Seawater resistance: GB/T5714 AATCC106
Water resistance: GB/T5713 AATCC107 ISO105, etc.
[Technical parameters]
1. Weight: 45N± 1%; 5 n plus or minus 1%
2. Splint size
115×60×1.5)mm3. Overall size
210×100×160)mm4. Pressure: GB: 12.5kpa; AATCC:12kPa
5. Weight: 12kg
-
(China)YYP203B Film Thickness Tester
YYP 203B film thickness tester is used to test the thickness of plastic film and sheet by mechanical scanning method, but empaistic film and sheet is not available.
-
YY-L1B Zipper Pull Light Slip Tester
1. The shell of the machine adopts metal baking paint, beautiful and generous;
2.Fixture, mobile frame are made of stainless steel, never rust;
3.The panel is made of imported special aluminum material, metal keys, sensitive operation, not easy to damage;
-
YY001Q Single Fiber Strength Tester (Pneumatic Fixture)
Used for testing the breaking strength, elongation at break, load at fixed elongation, elongation at fixed load, creep and other properties of single fiber, metal wire, hair, carbon fiber, etc.
-
YY213 Textiles Instant Contact Cooling Tester
Used for testing the coolness of pajamas, bedding, cloth and underwear, and can also measure the thermal conductivity.
-
(China)YY-SW-12J-Color fastness to washing tester
[Scope of application]
It is used for testing the colour fastness to washing, dry cleaning and shrinkage of various textiles, and also for testing the colour fastness to washing of dyes.
[Relevant standards]
AATCC61/1 A / 2 A / 3 A / 4 A / 5 A, JIS L0860/0844, BS1006, GB/T3921 1/2/3/4/5, ISO105C01/02/03/04/05/06/08, GB/T5711, DIN, NF, CIN/CGSB, AS, etc
[Instrument characteristics] :
1. 7 inch multi-functional color touch screen control;
2. Automatic water level control, automatic water intake, drainage function, and set to prevent dry burning function;
3. High-grade stainless steel drawing process, beautiful and durable;
4. With door touch safety switch and device, effectively protect the scald, rolling injury;
5. The imported industrial MCU control temperature and time, the configuration of “proportional integral (PID)” regulation function, effectively prevent the temperature “overshoot” phenomenon, and make the time control error ≤±1s;
6. Solid state relay control heating tube, no mechanical contact, stable temperature, no noise, long life;
7. Built-in a number of standard procedures, direct selection can be automatically run; And support program editing storage and single manual operation, to adapt to different methods of standard;
8. The test cup is made of imported 316L material, high temperature resistance, acid and alkali resistance, corrosion resistance.
[Technical parameters] :
1. Test cup capacity: 550ml (φ75mm×120mm) (GB, ISO, JIS and other standards)
200ml (φ90mm×200mm) (AATCC standard)
2. Distance from the center of the rotating frame to the bottom of the test cup: 45mm
3. Rotation speed
40±2)r/min4. Time control range: 9999MIN59s
5. Time control error: < ±5s
6. Temperature control range: room temperature ~ 99.9℃
7. Temperature control error: ≤±1℃
8. Heating method: electric heating
9. Heating power: 4.5KW
10. Water level control: automatic into, drainage
11. 7 inch multi-functional color touch screen display
12. Power supply: AC380V±10% 50Hz 4.5KW
13. Overall size
790×615×1100)mm14. Weight: 110kg
-
(China) YYP-2004 Electronic Balance
Using high precision electromagnetic force balance sensor. It makes the measurement result more accurate, the response speed is faster and the fault is less.
-
YY611M Air-cooled Climatic Colour Fastness Tester
Used in all kinds of textile, printing and dyeing, clothing, textile, leather, plastic and other non-ferrous materials light fastness, weather fastness and light aging experiment, through control test positions inside the project such as light, temperature, humidity, get wet in the rain, provide the necessary experiment simulated natural conditions, to detect the sample light fastness, weather fastness and light aging performance.