Products
-
（China）YY-TABER Leather Abrasion Tester
Instruments Introduction:
This machine is suitable for cloth, paper, paint, plywood, leather, floor tile, floor, glass, metal film,
natural plastic and so on. The test method is that the rotating test material is supported by a
pair of wear wheels, and the load is specified. The wear wheel is driven when the test
material is rotating, so as to wear the test material. The wear loss weight is the weight
difference between the test material and the test material before and after the test.
Meeting the standard：
DIN-53754、53799、53109,TAPPI-T476,ASTM-D3884,ISO5470-1，GB/T5478-2008
-
(China)YYPL 200 Leather Tensile Strengh Tester
I.Applications:
Suitable for leather, plastic film, composite film, adhesive, adhesive tape, medical patch, protective
film, release paper, rubber, artificial leather, paper fiber and other products tensile strength, peeling strength, deformation rate, breaking force, peeling force, opening force and other performance tests.
II.Application field:
Tape, automotive, ceramics, composite materials, construction, food and medical equipment, metal,
paper, packaging, rubber, textiles, wood, communication and various special-shaped materials
-
（China）YYP-4 Leather Dynamic Waterproof Tester
I.Product Introduction:
Leather, artificial leather, cloth, etc., under the water on the outside, the bending action is applied
to measure the permeability resistance index of the material. Number of test pieces 1-4 Counters 4 groups, LCD, 0~ 999999,4 sets ** 90W Volume 49×45×45cm Weight 55kg Power 1 #, AC220V,
2 A.
II.Test principle:
Leather, artificial leather, cloth, etc., under the water on the outside, the bending action is applied to measure the permeability resistance index of the material.
-
（China）YYP 50L Constant Temperature&Humidity Chamber
Meeting standard:
The performance indicators meet the requirements of GB5170, 2, 3, 5, 6-95 “Basic parameter Verification method of environmental test equipment for electrical and electronic products Low temperature, high temperature, constant wet heat, alternating wet heat test equipment”
Basic environmental test procedures for electrical and electronic products Test A: Low temperature
test method GB 2423.1-89 (IEC68-2-1)
Basic environmental test procedures for electrical and electronic products Test B: High temperature
test method GB 2423.2-89 (IEC68-2-2)
Basic environmental test procedures for electrical and electronic products Test Ca: Constant wet
heat test method GB/T 2423.3-93 (IEC68-2-3)
Basic environmental test procedures for electrical and electronic products Test Da: Alternating
humidity and heat test method GB/T423.4-93(IEC68-2-30)
-
（China）YYN06 Bally Leather Flexing Tester
I.Applications:
Leather flexure testing machine is used for the flexure test of shoe upper leather and thin leather
(shoe upper leather, handbag leather, bag leather, etc.) and cloth folding back and forth.
II.Test principle
The flexibility of the leather refers to the bending of one end surface of the test piece as the inside
and the other end surface as the outside, especially the two ends of the test piece are installed on
the designed test fixture, one of the fixtures is fixed, the other fixture is reciprocated to bend the
test piece, until the test piece is damaged, record the number of bending, or after a certain number
of bending. Look at the damage.
III.Meet the standard
BS-3144, JIB-K6545, QB1873, QB2288, QB2703, GB16799-2008, QB/T2706-2005 and other
leather flexure inspection method required specifications.
-
（China）YY127 Leather Color Test Machine
Summary：
Leather color test machine in the test of dyed upper, lining leather, after friction damage and
decolorization degree, can do dry, wet friction two tests, the test method is dry or wet white wool
cloth, wrapped in the surface of the friction hammer, and then the repeated friction clip on the test bench test piece, with power off memory function
Meet the standard:
The machine meet ISO / 105, ASTM/D2054, AATCC / 8, JIS/L0849 ISO – 11640, SATRA PM173, QB/T2537 standard, etc
-
（China）YY119 Leather Softness Tester
I.Equipment features:
This instrument fully conforms to IULTCS,TUP/36 standard, accurate, beautiful, easy to operate
and maintain, portable advantages.
II.Equipment application:
This instrument is specially used to measure the leather, hides, in order to understand the same
batch or the same package of leather in the soft and hard is uniform, can also test a single piece
of leather, each part of the soft difference.
-
（China）YY NH225 Yellowing Resistance Aging Oven
Summary:
It is manufactured in accordance with ASTM D1148 GB/T2454HG/T 3689-2001, and its function
is to simulate the ultraviolet radiation and heat of sunlight. The sample is exposed to ultraviolet
radiation and temperature in the machine, and after a period of time, the degree of yellowing
resistance of the sample is observed. The staining gray label can be used as a reference to
determine the grade of yellowing. The product is affected by sunlight radiation during use or the
influence of the container environment during transportation, resulting in the color change of the
product.
-
（China）YYP123C Box Compression Tester
Instruments features:
1.After the completion of the test automatic return function, automatically judge the crushing force
and automatically save the test data
2. Three kinds of speed can be set, all Chinese LCD operation interface, a variety of units to
choose from.
3.Can input the relevant data and automatically convert the compressive strength, with
packaging stacking test function; Can directly set the force, time, after the completion of
the test automatically shut down.
4. Three working modes:
Strength test: can measure the maximum pressure resistance of the box;
Fixed value test: the overall performance of the box can be detected according to the set pressure;
Stacking test: According to the requirements of national standards, stacking tests can be carried
out under different conditions such as 12 hours and 24 hours.
III.Meet the standard:
GB/T 4857.4-92 Pressure test method for packaging transportation packages
GB/T 4857.3-92 Test method for static load stacking of packaging and transportation packages.
-
（China）YY710 Gelbo Flex Tester
I.Instrument Applications:
For non-textile fabrics, non-woven fabrics, medical non-woven fabrics in the dry state of the amount
of fiber scraps, raw materials and other textile materials can be dry drop test. The test sample is subjected to a combination of torsion and compression in the chamber. During this twisting process,
air is extracted from the test chamber, and the particles in the air are counted and classified by a
laser dust particle counter.
II.Meet the standard:
GB/T24218.10-2016,
ISO 9073-10,
INDA IST 160.1,
DIN EN 13795-2,
YY/T 0506.4,
EN ISO 22612-2005,
GBT 24218.10-2016 Textile nonwovens test methods Part 10 Determination of dry floc, etc.;
-
（China）Single Side Test Bench PP
Bench size can be customized; Make renderings for free.
-
(China)Central Test Bench PP
Bench size can be customized; Make renderings for free.
-
(China)Single Side Test Bench All Steel
Table top:
Using 12.7mm solid black physical and chemical board for the laboratory,
thickened to 25.4mm around, double-layer exterior garden along the edge,
acid and alkali resistance, water resistance, anti-static, easy to clean.
-
（China）Central Test Bench All Steel
Table top:
Using 12.7mm solid black physical and chemical board for the laboratory, thickened to 25.4mm
around, double-layer exterior garden along the edge, acid and alkali resistance,
water resistance, anti-static, easy to clean.
-
（China）Laboratory Fume Exhaust
Joint:
Adopts corrosion-resistant high-density PP material, can rotate 360 degrees to adjust the direction, easy to disassemble, assemble and clean
Sealing device:
The sealing ring is made of wear-resistant, corrosion-resistant and age-resistant high-density rubber and plastic material
Joint link rod:
Made of stainless steel
Joint tension knob:
The knob is made of corrosion-resistant high-density material, embedded metal nut, stylish and atmospheric appearance.
-
(China)YYT1 Laboratory Fume Hood
I.Material profile:
1. The main side plate, front steel plate, back plate, top plate and lower cabinet body can be made
of 1.0~1.2mm thick steel plate, 2000W imported from Germany
Dynamic CNC laser cutting machine cutting material, bending using automatic CNC bending
machine one at a time bending molding, the surface through epoxy resin powder
Electrostatic line automatic spraying and high temperature curing.
2. The lining plate and the deflector adopts 5mm thick core anti-double special plate with good
anti-corrosion and chemical resistance. The baffle fastener uses PP
High quality material production integrated molding.
3. Move the PP clamp on both sides of the window glass, handle PP into one body, embed 5mm tempered glass, and open the door at 760mm.
Free lifting, sliding door up and down sliding device adopts pulley wire rope structure, stepless
arbitrary stay, sliding door guide device by anti-corrosion polymerization
Made of vinyl chloride.
3. The fixed window frame is made of epoxy resin spraying of steel plate, and 5mm thick tempered glass is embedded in the frame.
4. The table is made of (domestic) solid core physical and chemical board (12.7mm thick) acid and alkali resistance, impact resistance, corrosion resistance, formaldehyde reaches E1 level standards.
5. All the internal connection devices of the connection part need to be hidden and corrosion
resistant, there are no exposed screws, and the external connection devices are resistant
Corrosion of stainless steel parts and non-metallic materials.
6. The exhaust outlet adopts an integrated air hood with the top plate. The diameter of the outlet
is 250mm round hole, and the sleeve is connected to reduce the gas disturbance.
-
（China）YY611D Air Cooled Weathering Color Fastness Tester
Instrument use:
It is used for light fastness, weather fastness and light aging experiment of various textile, printing
and dyeing, clothing, geotextile, leather, plastic and other colored materials. By controlling the light, temperature, humidity, rain and other items in the test chamber, the simulation natural conditions required for the experiment are provided to test the light fastness, weather fastness and light aging performance of the sample.
Meet the standard:
GB/T8427, GB/T8430, ISO105-B02, ISO105-B04 and other standards.
-
（China）YY611B Weathering Color Fastness Tester
Used in textile, printing and dyeing, clothing, automotive interior parts, geotextiles, leather, wood-based panels, wood floors, plastics and other colored materials light fastness, weather resistance and light aging test. By controlling the items such as light irradiance, temperature, humidity and rain in the test chamber, the simulated natural conditions required by the experiment are provided to test the light fastness, weather fastness and photoaging properties of the sample. With light intensity online control; Automatic monitoring and compensation of light energy; Closed-loop control of temperature and humidity; Blackboard temperature loop control and other multi-point adjustment functions. Meets American, European and national standards.
-
（China）YYP-WDT-20A1 Electronic Universal Testing Machine
I.Summarize
WDT series micro control electronic universal testing machine for double screw, host, control, measurement, operation integrated structure. It is suitable for tensile, compression, bending, elastic modulus, shearing, stripping, tearing and other mechanical properties test of all kinds of
(thermosetting, thermoplastic) plastics, FRP, metal and other materials and products. Its software system adopts WINDOWS interface (multiple language versions to meet the use of different
countries and regions), can measure and judge various performance according to national
standards, international standards or user-provided standards, with test parameter setting storage,
test data collection, processing and analysis, display print curve, test report print-out and other functions. This series of testing machine is suitable for material analysis and inspection of engineering plastics, modified plastics, profiles, plastic pipes and other industries. Widely used in scientific research institutions, colleges and universities, quality inspection departments, production enterprises.
Product characteristics
The transmission part of this series of testing machine adopts imported brand AC servo system, deceleration system, precision ball screw, high-strength frame structure, and can be selected
according to the need of large deformation measuring device or small deformation electronic
extender to accurately measure the deformation between the effective marking of the sample. This series of testing machine integrates modern advanced technology in one, beautiful shape, high precision, wide speed range, low noise, easy operation, accuracy up to 0.5, and provides a variety
of specifications/uses of fixtures for different users to choose. This series of products has obtained
the EU CE certification.
II.Executive standard
Meet GB/T 1040, GB/T 1041, GB/T 8804, GB/T 9341, ISO 7500-1, GB 16491, GB/T 17200,
ISO 5893, ASTM D638, ASTM D695, ASTM D790 and other standards.
-
（China）YYP 20KN Electronic Universal Tension Machine
1.Features and uses:
20KN electronic universal material testing machine is a kind of material testing equipment with
domestic leading technology. The product is suitable for tensile, compression, bending, shearing, tearing, stripping and other physical properties test of metal, non-metal, composite materials and products. The measurement and control software uses Windows 10 operating system platform, graphical software interface, flexible data processing mode, modular VB programming method,
safe limit protection and other functions. It also has the function of automatic algorithm generation
and automatic editing of test report, which greatly facilitates and improves the debugging and
system redevelopment ability, and can calculate parameters such as maximum force, yield force,
non-proportional yield force, average stripping force, elastic modulus, etc. It has novel structure, advanced technology and stable performance. Simple operation, flexible, easy maintenance;
Set a high degree of automation, intelligence in one. It can be used for mechanical properties
analysis and production quality inspection of various materials in scientific research departments, colleges and universities and industrial and mining enterprises.