Rubber Testing Instruments
-
（China）YY-6016 Vertical Rebound Tester
I. Introductions: The machine is used to test the elasticity of rubber material with a free drop hammer. First adjust the level of the instrument, and then lift the drop hammer to a certain height. When placing the test piece, attention should be paid to making the drop point 14mm away from the edge of the test piece. The average rebound height of the fourth, fifth and sixth tests was recorded, excluding the first three tests. II.Main functions: The machine adopts the standard test method of ... -
（China）YY-6018 Shoe Heat Resistance Tester
I. Introductions: Shoe heat resistance tester used to test the high temperature resistance of sole materials (including rubber, polymer). After contacting the sample with the heat source (metal block at constant temperature) at a fixed pressure for about 60 seconds, observe the surface damage of the specimen, such as softening, melting, cracking, etc., and determine whether the specimen is qualified according to the standard. II.Main functions: This machine adopts vulcanized rubber or thermop... -
（China）YY-6024 Compression Set Fixture
I. Introductions: This machine is used for rubber static compression test, sandwiched between the plate, with the screw rotation, compression to a certain ratio and then put into a certain temperature oven, after the specified time to take, remove the test piece, cool for 30 minutes, measure its thickness, put into the formula to find its compression skew. II. Meeting standard: GB/T 7759-1996 ASTM-D395 III.Technical Specifications: 1. The matching distance ring: 4 mm/4. 5 mm/5mm/9. 0 mm/9. 5... -
（China）YY-6027-PC Sole Puncture Resistant Tester
I. Introductions: A:(static pressure test) : test the shoe head at a constant rate through the testing machine until the pressure value reaches the specified value, measure the minimum height of the sculpted clay cylinder inside the test shoe head, and evaluate the compression resistance of the safety shoe or protective shoe head with its size. B: (Puncture test) : The testing machine drives the puncture nail to puncture the sole at a certain speed until the sole is completely pierced or reac... -
（China）YY-6077-S Temperature &Humidity Chamber
I. Introductions: High temperature &high humidity, low temperature & low humidity test products, suitable for electronic, electrical appliances, batteries, plastics, food, paper products, vehicles, metal, chemistry, building materials, research institute, inspection and quarantine bureau, universities and other industry units for quality control testing. II. Freezing system: RRefrigeration system: adopting France tecumseh compressors, European and American type high efficiency powe... -
（China）YY-DH-300 Density Balance
Brief introduction: This series of densitometer is mainly aimed at the density measurement of polymer field, excellent quality, high precision density, real-time display density value, easy to operate, save time; Better measurement stability and reliability; Suitable for demanding occasions. Widely used: Polymer, plastic, rubber, wire and cable, composite materials, packaging materials, shoes, pipes, electrical appliances, sports equipment, tires, glass industry, rocks, ores, jewelry, crops, ... -
（China）FTIR-2000 Fourier Transfor Infrared Spectrometer
FTIR-2000 Fourier infrared spectrometer can be widely used in pharmaceutical, chemical, food, petrochemical, jewelry, polymer, semiconductor, material science and other industries, the instrument has strong expansion function, can connect a variety of conventional transmission, diffuse reflection, ATR attenuated total reflection, non-contact external reflection and other accessories, The FTIR-2000 will be the perfect choice for your QA/QC application analysis in universities, research institu... -
（China）YY101 Single Column Universal Testing Machine
This machine can be used for rubber, plastic, foam material, plastic, film, flexible packaging, pipe, textile, fiber, nano material, polymer material, polymer material, composite material, waterproof material, synthetic material, packaging belt, paper, wire and cable, optical fiber and cable, safety belt, insurance belt, leather belt, footwear, rubber belt, polymer, spring steel, stainless steel, castings, copper pipe, non-ferrous metal, Tensile, compression, bending, tearing, 90° peeling, 18... -
（China）YY0306 Footwear Slip Resistance Tester
Suitable for the anti-skid performance test of whole shoes on glass, floor tile, floor and other materials. GBT 3903.6-2017 “General Test Method for Footwear Anti-slip Performance”, GBT 28287-2012 “Test Method for Foot Protective Shoes Anti-slip Performance”, SATRA TM144, EN ISO13287:2012, etc. 1. The selection of high-precision sensor test more accurate; 2. The instrument can test the friction coefficient and test the research and development of ingredients to make ba... -
（China）YYP-800A Digital Display Shore Hardness Tester (Shore A)
YYP-800A digital display Shore hardness tester is A high precision rubber hardness tester (Shore A) manufactured by YUEYANG TECHNOLOGY INSTRUNENTS. It is mainly used to measure the hardness of soft materials, such as natural rubber, synthetic rubber, butadiene rubber, silica gel, fluorine rubber, such as rubber seals, tires, cots, cable ， and other related chemical products. Comply with GB/T531.1-2008, ISO868, ISO7619, ASTM D2240 and other relevant standards. (1) Maximum locking function, av... -
(China)YY026H-250 Electronic Tensile Strength Tester
This instrument is the domestic textile industry powerful test configuration of high-grade, perfect function, high precision, stable and reliable performance model. Widely used in yarn, fabric, printing and dyeing, fabric, clothing, zipper, leather, nonwoven, geotextile and other industries of breaking, tearing, breaking, peeling, seam, elasticity, creep test.
-
YYP–HDT VICAT TESTER
The HDT VICAT TESTER is used to determine Heating deflection and Vicat softening temperature of the plastic, rubber etc. thermoplastic , It is widely used in the production, research and teaching of plastic raw materials and products. The series of instruments are compact in structure, beautiful in shape, stable in quality, and have the functions of discharging odor pollution and cooling. Using advanced MCU (multi-point micro-control unit) control system, automatic measurement and control of temperature and deformation, automatic calculation of test results, can be recycled to store 10 sets of test data. This series of instruments have a variety of models to choose from: automatic LCD display, automatic measurement; micro-control can connect computers, printers, controlled by computers, test software WINDOWS Chinese (English) interface, with automatic measurement, real-time curve, data storage, printing and other functions.
Technical parameter
1. Temperature control range: room temperature to 300 degrees centigrade.
2. heating rate: 120 C /h [(12 + 1) C /6min]
50 C /h [(5 + 0.5) C /6min]
3. maximum temperature error: + 0.5 C
4. deformation measurement range: 0 ~ 10mm
5. maximum deformation measurement error: + 0.005mm
6. the accuracy of deformation measurement is: + 0.001mm
7. sample rack (test station):3, 4, 6 (optional)
8. support span: 64mm, 100mm
9. the weight of the load lever and the pressure head (needles): 71g
10. heating medium requirements: methyl silicone oil or other media specified in the standard (flash point greater than 300 degrees Celsius)
11. cooling mode: water below 150 degrees Celsius, natural cooling at 150 C.
12. has upper limit temperature setting, automatic alarm.
13. display mode: LCD display, touch screen
14. The test temperature can be displayed, the upper limit temperature can be set, the test temperature can be automatically recorded, and the heating can be stopped automatically after the temperature reaches the upper limit.
15. deformation measurement method: special high-precision digital dial gauge + automatic alarm.
16. It has an automatic smoke removal system, which can effectively inhibit the smoke emission and maintain a good indoor air environment at all times.
17. power supply voltage: 220V + 10% 10A 50Hz
18. heating power: 3kW