Wholesale Price China Dumbbell Prototype - YYP252 Drying Oven – Yueyang

1: Standard large-screen LCD display, display multiple sets of data on one screen, menu-type operation interface, easy to understand and operate.

2: The fan speed control mode is adopted, which can be adjusted freely according to different experiments.

3: The self-developed air duct circulation system can automatically discharge the water vapor in the box without manual adjustment.

4: Using a microcomputer PID fuzzy controller, with over-temperature protection function, can quickly reach the set temperature, stable operation.

5: Adopt mirror stainless steel liner, four-corner semi-circular arc design, easy to clean, adjustable spacing between partitions in the cabinet

6: The sealing design of the new synthetic silicon sealing strip can effectively prevent heat loss and extend the length of each component on the basis of energy saving of 30%.

Service life.

7: Adopt JAKEL tube flow circulating fan, unique air duct design, produce good air convection to ensure uniform temperature.

8: PID control mode, temperature control accuracy fluctuation is small, with timing function, the maximum time setting value is 9999 minutes.

1. Embedded printer-convenient for customers to print data.

2. Independent temperature limit alarm system-exceeding the limit temperature, forcibly stopping the heating source, escorting your laboratory safety.

3. RS485 interface and special software-connect to computer and export experiment data.

4. Test hole 25mm / 50mm-can be used to test the actual temperature in the working room.

Technical Parameters

Note: The performance parameters are tested under no-load conditions, without strong magnetism and vibration: ambient temperature 20℃, ambient humidity 50%RH.

When the input power is ≥2000W, the 16A plug is configured, and the remaining products are equipped with 10A plugs.