(China)YY-4065C Pendulus Rebound Instrument
Short Description:
Introductions:
Rubber impact elasticity testing machine for energy 0.5J pendulum type impact elasticity testing machine, suitable for the determination of hardness between 30IRHD~85IRHD vulcanized rubber
The rebound value of the glue.
In line with GB/T1681 “vulcanized rubber resilience determination” and ISO 4662 and other standards.
The machine adopts touch screen control, high control precision, the measured data can be printed by micro printer.
Technical Parameters:
| Item | Technical Request |
| Punch diameter | φ12.45~φ15mm |
| Test Piece thickness | 12.5±0.5mm |
| Sample Size | φ29mm×12.5mm |
| Impact mass | 0.34~0.35 kg |
| Impact velocity | 1.4 ~2.0 m/s |
| Impact Angle | 90° |
| Dimension | 550mm×180mmx 470mm |
| Power |
AC220V 60Hz 50W
|
YY-4065C Pendulus Rebound Instrument Operation Video
开始试验--Connect the power supply and turn on the power switch on the back of the machine
先调节水平--First adjust the machine level
将水平泡调节到中间范围--Adjust the horizontal bubble to the middle range
摆动冲击杆--Swinging impact rod
使他呈现自由垂直状态--Make the impact rod in a free vertical state
按RESET键--Press” RESET”
先把夹具松开---Loosen the fixture first
放入试样---Put the samples in the fixture
夹具夹紧---Make the Clamp clamping
这个可以旋转，用于微调夹具松紧程度---This can be rotated to fine-tune the tightness of the fixture
这个可以把夹具夹紧--This will hold the jig together
按RESET键--Press “RESET”
将冲击杆挂起---Hang the impact rod
这两个指示灯都是绿色时---When both lights are green
按IMPACT键，释放冲击杆---Press” IMPACT”, Release rod, finish the test for one time.
