（China）YY-6007B EN Bennewart Flex Tester 

I. Introductions:

The sole test sample is installed on the EN zigzag testing machine, so that the notch falls on the EN zigzag testing machine is just above the center of the rotating shaft. The EN zigzag testing machine drives the test piece to stretch (90±2)º zigzag on the shaft. After reaching a certain number of tests, the notch length of the test sample is observed to measure.

The folding resistance of the sole was evaluated by the incision growth rate.

II. Main functions:

Test rubber, EVA, TPR and other zigzag shoe soles after 90 degrees bending, its bending resistance and resistance to the growth of the notch, namely zigzag resistance.

III.Reference Standard:

SATRA TM161, GB/T2099-2007, ENISO 20344-2011, EN ISO17707, ENISO-20344, DIN53543 QB/T2885-2007 and other standards.

IV. Instrument characteristics:

①The body surface treatment: the United States dupont powder, electrostatic painting process, the curing temperature 200 ℃ to ensure long do not fade.

② LED-SLD80 display control box, menu operation mode;

③Can adjust position, inching test speed is adjustable;

④Mechanical parts by the corrosion of aluminum and stainless steel structure material composition;

⑤Precision drive motors, smooth operation, low noise;

⑥Have time counting and automatic stop function, set the test values can be automatically stop testing;

⑦High precision bearings, rotational stability, long life;

⑧Mechanical parts by the corrosion of aluminum and stainless steel structure material composition;

⑨Test with one button, simple and convenient operation;

⑩The new vertical structure design, sample installation is convenient;

⑾Can test the three samples at the same time, synchronous twists and turns;

⑿well-formed open shield to protect the operator’s hands, and the other has open or stop protect induction function.

V. Technical Specifications:

1.The number of stations: 3 stations (at the same time can measure 3 outsole);

2. Zigzag Angle: (90±2)º;

3. Speed: 5~150cpm adjustable;

4. Point function: sample installation, one key self-positioning function;

5. Volume volume: 86*46*80cm;

6. Zigzag shaft diameter: 30mm;

7.Protective cover: induction type safety cover;

8. Weight: 118kg;

9. Power source: AC220V,10A;

VI. Random Configuration:

1. Main machine–1 set

2. Inner hexagonal plate hand– 1 set

3. Cutting knife-1 pcs

4. Power cable–1 pcs