（China）YY-6077-S Temperature &Humidity Chamber

I. Introductions:

High temperature &high humidity, low temperature & low humidity test products, suitable for electronic, electrical appliances, batteries, plastics, food, paper products, vehicles, metal, chemistry, building materials, research institute, inspection and quarantine bureau, universities and other industry units for quality control testing.

II. Freezing system:

RRefrigeration system: adopting France tecumseh compressors, European and American type high efficiency power-saving cryogenic refrigeration system (air-cooled heat);

RCold heat exchange system: high efficiency SWEP refrigerant heat transfer design (environmental protection refrigerant R404A);

RHeat load regulation: automatically adjust the refrigerant flow, effectively eliminate the heat heat load distribution;

RCondenser: fin chip cooling motor attached;

REvaporator: fin chip sections of automatic load capacity adjustment;

ROther accessories: desiccant, refrigerant flow window, valve repair;

RSystem: expansion capacity control of the refrigeration system.

III. Reference Standard:

Meet GB10586-2006: humidity and heat test chamber technical conditions

GB10589-2008: Technical conditions for low temperature test chamber

◆ The performance indicators meet the requirements of GB5170, 2, 3, 5, 6-95 “Basic parameter verification method of environmental test equipment for electrical and electronic products: low temperature, high temperature, constant humid heat, alternating humid heat test equipment”

◆ Basic environmental test procedures for electrical and electronic products Test A: low temperature test method GB 2423.1-89 (IEC68-2-1)

◆ Basic environmental test procedures for electrical and electronic products test B: high temperature test method GB 2423.2-89 (IEC68-2-2)

◆ Basic environmental test procedures for electrical and electronic products test Ca: constant humid heat test method GB/T 2423.3-93 (IEC68-2-3)

GB/T 2423.4-2008 is the national standard for environmental testing of electrical and electronic products issued by Standardization Administration of China

Electrical and electronic products basic environmental test procedures test Da: alternating humidity and heat test method GB/T423.4-93(IEC68-2-30)

IV.Instrument characteristics:

RBladder are of high quality stainless steel, semi-circular four design make cleaning more convenient:

RReasonable duct and circulatory system, make work indoor temperature uniformity is good;

RAdopts high performance motor and blades, with air convection breeze device, inner chamber air can update cycle.

RUsing nanometer material door gasket and insulation materials is to make the whole machine performance more superior;

RShell is made of cold-rolled steel plate manufacturing, surface electrostatic pensu:

RThe taikang original compressor, cooling intensity of cooling effect;

RBody heat preservation material: 100 mm high temperature resistant rigid polyurethane foam;

RFin type radiator pipe shaped stainless steel heater five;

RDouble heat insulation air-tight, effectively isolate the heat exchange inside and outside the box;

RCold heat exchange device cold heat exchange device adopt high efficiency coal SWEP cold cold heat exchange design;

RLCD touch panel in both Chinese and English;

V. Program capacity and control functions:

RCan use the program group: 10 groups

RCan use the procedures section number: 120

RCan repeat order: each command can be up to 999 times

RApplication type and the production of mining dialogue, with functions of editing, remove and insert

RSet 0 ~ 99 hour59min application time

RHave memory power applications, complex after start automatically and the function in the executable program

RCurve when the program execution can be real-time display graphics

RWith date and time adjustment, reservation startup, shutdown function and screen LOCK (LOCK) function

VI. Technical Specifications:

1. System: balanced temperature regulator humidity control system

2. Temperature range: -60℃ ~ +150℃

3. Temperature fluctuation: ≤±0.5℃

4. Humidity range: 20-95%R.H

5. Temperature uniformity: ≤2℃

6. Temperature accuracy: ±0.2℃

7. Humidity fluctuation: ±2.5%R.H

8. Heating time: +25℃→+85℃ room temperature to 85℃ about 30 minutes no load

9. Shelf in the box: 1 piece of stainless steel square perforated steel shelf and 4 groups of track (adjust the spacing);

10. Cooling time: +25℃→-20℃ room temperature to -20℃ about 45 minutes no load

VII.Standard configuration of the testing chamber:

1. Windows 320x420x40mm 3 layers vacuum toughened glass.

2. Flat embedded handle.

3. Door Hinges :SUS #304 Inlet hinges

4. Energy-saving lamp in the box: LED light emitting way

5. Lead hole: φ50mm 1 (with glue plug 1)

6. 2℃-4℃/min (from constant temperature to the highest temperature, nonlinear no-load);

7.0.7℃-1℃/min (from room temperature to the lowest temperature, nonlinear no-load);

8. Inner box size: 500*500*600mm

9. Outer box volume: 1150×1050×1500mm

10, Inside and outside box material: high quality stainless steel;

11. Power source: AC220V

I. Introductions:

High temperature &high humidity, low temperature & low humidity test products, suitable for electronic, electrical appliances, batteries, plastics, food, paper products, vehicles, metal, chemistry, building materials, research institute, inspection and quarantine bureau, universities and other industry units for quality control testing.

II. Freezing system:

RRefrigeration system: adopting France tecumseh compressors, European and American type high efficiency power-saving cryogenic refrigeration system (air-cooled heat);

RCold heat exchange system: high efficiency SWEP refrigerant heat transfer design (environmental protection refrigerant R404A);

RHeat load regulation: automatically adjust the refrigerant flow, effectively eliminate the heat heat load distribution;

RCondenser: fin chip cooling motor attached;

REvaporator: fin chip sections of automatic load capacity adjustment;

ROther accessories: desiccant, refrigerant flow window, valve repair;

RSystem: expansion capacity control of the refrigeration system.

III. Reference Standard:

Meet GB10586-2006: humidity and heat test chamber technical conditions

GB10589-2008: Technical conditions for low temperature test chamber

◆ The performance indicators meet the requirements of GB5170, 2, 3, 5, 6-95 “Basic parameter verification method of environmental test equipment for electrical and electronic products: low temperature, high temperature, constant humid heat, alternating humid heat test equipment”

◆ Basic environmental test procedures for electrical and electronic products Test A: low temperature test method GB 2423.1-89 (IEC68-2-1)

◆ Basic environmental test procedures for electrical and electronic products test B: high temperature test method GB 2423.2-89 (IEC68-2-2)

◆ Basic environmental test procedures for electrical and electronic products test Ca: constant humid heat test method GB/T 2423.3-93 (IEC68-2-3)

GB/T 2423.4-2008 is the national standard for environmental testing of electrical and electronic products issued by Standardization Administration of China

Electrical and electronic products basic environmental test procedures test Da: alternating humidity and heat test method GB/T423.4-93(IEC68-2-30)

IV.Instrument characteristics:

RBladder are of high quality stainless steel, semi-circular four design make cleaning more convenient:

RReasonable duct and circulatory system, make work indoor temperature uniformity is good;

RAdopts high performance motor and blades, with air convection breeze device, inner chamber air can update cycle.

RUsing nanometer material door gasket and insulation materials is to make the whole machine performance more superior;

RShell is made of cold-rolled steel plate manufacturing, surface electrostatic pensu:

RThe taikang original compressor, cooling intensity of cooling effect;

RBody heat preservation material: 100 mm high temperature resistant rigid polyurethane foam;

RFin type radiator pipe shaped stainless steel heater five;

RDouble heat insulation air-tight, effectively isolate the heat exchange inside and outside the box;

RCold heat exchange device cold heat exchange device adopt high efficiency coal SWEP cold cold heat exchange design;

RLCD touch panel in both Chinese and English;

V. Program capacity and control functions:

RCan use the program group: 10 groups

RCan use the procedures section number: 120

RCan repeat order: each command can be up to 999 times

RApplication type and the production of mining dialogue, with functions of editing, remove and insert

RSet 0 ~ 99 hour59min application time

RHave memory power applications, complex after start automatically and the function in the executable program

RCurve when the program execution can be real-time display graphics

RWith date and time adjustment, reservation startup, shutdown function and screen LOCK (LOCK) function

VI. Technical Specifications:

1. System: balanced temperature regulator humidity control system

2. Temperature range: -60℃ ~ +150℃

3. Temperature fluctuation: ≤±0.5℃

4. Humidity range: 20-95%R.H

5. Temperature uniformity: ≤2℃

6. Temperature accuracy: ±0.2℃

7. Humidity fluctuation: ±2.5%R.H

8. Heating time: +25℃→+85℃ room temperature to 85℃ about 30 minutes no load

9. Shelf in the box: 1 piece of stainless steel square perforated steel shelf and 4 groups of track (adjust the spacing);

10. Cooling time: +25℃→-20℃ room temperature to -20℃ about 45 minutes no load

VII.Standard configuration of the testing chamber:

1. Windows 320x420x40mm 3 layers vacuum toughened glass.

2. Flat embedded handle.

3. Door Hinges :SUS #304 Inlet hinges

4. Energy-saving lamp in the box: LED light emitting way

5. Lead hole: φ50mm 1 (with glue plug 1)

6. 2℃-4℃/min (from constant temperature to the highest temperature, nonlinear no-load);

7.0.7℃-1℃/min (from room temperature to the lowest temperature, nonlinear no-load);

8. Inner box size: 500*500*600mm

9. Outer box volume: 1150×1050×1500mm

10, Inside and outside box material: high quality stainless steel;

11. Power source: AC220V

VIII.Random configuration:

IX .Configuration List: