(China)YY026H-250 Electronic Tensile Strength Tester
This instrument is the domestic textile industry powerful test configuration of high-grade, perfect function, high precision, stable and reliable performance model. Widely used in yarn, fabric, printing and dyeing, fabric, clothing, zipper, leather, nonwoven, geotextile and other industries of breaking, tearing, breaking, peeling, seam, elasticity, creep test.
GB/T3923.1、GB/T3917.2-2009、GB/T3917.3-2009、GB/T3917.4-2009、GB/T3917.5-2009、GB/T13773.1-2008、FZ/T80007.1-2006.
1. Adopt servo driver and motor (vector control), the motor response time is short, no speed overrush, speed uneven phenomenon.
2. Equipped with encoder for accurate control of instrument positioning and elongation.
3. Equipped with high precision sensor, "STMicroelectronics" ST series 32-bit MCU, 24 A/D converter.
4. Equipped with pneumatic fixture, the clip can be replaced, and can be customized with customer materials.
5. Online software support Windows operating system,
6. The instrument supports the host and computer two-way control.
7. Pre tension software digital setting.
8. Distance length digital setting, automatic positioning.
9.Conventional protection: mechanical switch protection, upper and lower limit travel, overload protection, over-voltage, over-current, overheating, under-voltage, under-current, leakage automatic protection, emergency switch manual protection.
10. Tear, peel test curve peak selection and determination conditions can be set by the customer.
11. Force value calibration: digital code calibration (authorization code), convenient instrument verification, control precision.
12. The whole machine circuit standard modular design, convenient instrument maintenance and upgrade.
1. The software supports Windows operating system, out of the box, very convenient, without professional training.
2. The computer online software support Chinese and English operation.
3. Solidify the test program confirmed by the user, each parameter has a default value, the user can modify.
4. Parameter setting interface: sample material number, color, batch, sample number and other parameters are independently set and printed or saved to.
5. The function of zooming in and out of the selected points of the test curve. Click any point of the test point to display the tensile and elongation values.
6. The test data report can be converted into Excel, Word, etc., automatic monitoring test results, convenient to connect with customer enterprise management software.
7. The test curve is saved to the PC, so as to record the inquiry.
8. The test software includes a variety of material strength test methods, so that the test is more convenient, fast, accurate and low cost operation.
9. The selected part of the curve can be zoomed in and out at will during the test.
10. The tested sample curve can be displayed in the same report as the test result.
11. Statistical point function, namely reading the data on the measured curve, can provide a total of 20 groups of data, and obtain the corresponding elongation or force value according to the different force value or elongation input by users.
15. Multiple curve superposition function.
16. Test units can be arbitrarily converted, such as Newton, pounds, kilogram force and so on.
17. Software analysis function: breaking point, breaking point, stress point, yield point, initial modulus, elastic deformation, plastic deformation, etc.
18.Unique (host, computer) two-way control technology, so that the test is convenient and fast, the test results are rich and varied (data reports, curves, graphs, reports).
1. Range and indexing value: 2500N, 0.1N;
2. The resolution of force value 1/60000
3.Force sensor accuracy: ≤±0.05%F·S
4. The machine load accuracy: full range of 2% ~ 100% any point accuracy ≤±0.1%, grade: 1 level
5. The beam speed adjustment range (up, down, speed regulation, fixed speed) :(10 ~ 500) mm/min (within the range of free setting)
6. Effective stroke: 800mm
7. Displacement resolution: 0.01mm
8. The minimum clamping distance: 10mm
9. Clamping distance positioning mode: digital setting, automatic positioning
10. Gantry width: 360mm
11. Unit conversion: N, CN, IB, IN
12.Data storage (host part) :≥2000 groups
13. Power supply: 220V,50HZ,1000W
14. External size: 800mm×600mm×2000mm (L×W×H)
15. Weight: 220kg
1. Host---1 Set
2.Clamps:
1). Manually pull off the clamps
2). Manual jacking fixture clamps
3. On line analysis software
4. On-line communication accessories
5. Local Cell: 2500N
6. Software Configuration: Quality Control Operation Software (CD-ROM)
7. Tensile clamps:
2N--1 Pcs
5N--1 Pcs
10N---1 Pcs
1)GB/T3923.1---Textiles - Determination of tensile strength at break and elongation at break - Strip method
2)GB/T3923.2---Textiles -- Determination of tensile properties of fabrics -- Determination of breaking strength and elongation at break -- Grasping method
3)GB/T3917.2-2009---Tearing property of textiles - Determination of tearing strength of trousers specimen (single seam)
4)GB/T3917.3-2009--Textiles - Determination of tearing strength of trapezoidal specimens
5)GB/T3917.4-2009---Textiles - Tearing properties of lingual specimens (double seam) - Determination of tearing strength
6)GB/T3917.5-2009---Textiles - Tearing properties of fabrics - Determination of tearing strength of airfoil specimens (single seam)
7)GB/T19976-2005----Textiles - Determination of bursting strength - Ball method
8)FZ/80007.1-2006---Test method for peel strength of garments using adhesive lining
