YY101B–Integrated Zipper Strength Tester
Used for zipper flat pull, top stop, bottom stop, open end flat pull, pull head pull piece combination, pull head self-lock, socket shift, single tooth shift strength test and zipper wire, zipper ribbon, zipper sewing thread strength test.
QB/T2171,QB/T2172,QB/T2173.
1.Adopt imported servo driver and motor (vector control), the motor response time is short, no speed overrush, speed uneven phenomenon.
2.Selected imported ball screw, precision guide rail, long service life, low noise, low vibration.
3.Equipped with imported encoder to accurately control the positioning and elongation of the instrument.
4.Equipped with high precision sensor, "STMicroelectronics" ST series 32-bit MCU, 24-bit A/D converter.
5. Equipped with pneumatic clamps, the clip can be replaced, and can be customized with customer materials.
6.Online software support Windows operating system.
7. The instrument supports the host and computer two-way control.
8.Pre tension software digital setting.
9. Distance length digital setting, automatic positioning.
10.Conventional protection: mechanical switch protection, upper and lower limit travel, overload protection, over-voltage, over-current, overheating, under-voltage, under-current, leakage automatic protection, emergency switch manual protection.
11.Force value calibration: digital code calibration (authorization code), convenient instrument verification, control precision.
1. The software supports Windows operating system, very convenient, without professional training can used well after open the packaging!
2. The computer online software support Chinese and English operation.
3. Solidify the test program confirmed by the user, each parameter has a default value, the user can modify.
4.Parameter setting interface: sample material number, color, batch, sample number and other parameters are independently set and printed or saved.
5. The function of zooming in and out of the selected points of the test curve. Click any point of the test point to display the tensile and elongation values.
6. The test data report can be converted into Excel, Word, etc., automatic monitoring test results, convenient to connect with customer enterprise management software.
7.The test curve is saved to the PC, so as to record the inquiry.
8. The test software includes a variety of material strength test methods, so that the test is more convenient, fast, accurate and low cost operation.
9. The selected part of the curve can be zoomed in and out at will during the test.
10. The tested sample curve can be displayed in the same report as the test result.
11. Statistical point function, namely reading the data on the measured curve, can provide a total of 20 groups of data, and obtain the corresponding elongation or force value according to the different force value or elongation input by users.
12. Multiple curve superposition function.
13. Test units can be arbitrarily converted, such as Newton, pounds, kilogram force and so on.
14. Software analysis function: breaking point, breaking point, stress point, yield point, initial modulus, elastic deformation, plastic deformation, etc.
15. Unique (host, computer) two-way control technology, so that the test is convenient and fast, the test results are rich and varied (data reports, curves, graphs, reports).
| Range & Indexing Value | 2500N，0.05N |
| Force resolution | 1/300000 |
| Force sensor accuracy | ≤±0.05%F·S |
| The Whole Machine load Accuracy | Full-scale 2%-100% accuracy of any point ≤±0.1%, Grade: 1 |
| Adjustable range of beam speed(Up, down, speed regulation, fixed speed) | (0.1 ~ 1000) mm/min (set freely within the range) |
| Effective distance | 800mm |
| Displacement resolution | 0.01mm |
| Minimum clamping distance | 10mm |
| Clamping distance positioning mode | Digital setting, automatic positioning |
| Gantry width | 360mm |
| Unit conversion | N、cN、Ib、in |
| Data storage (host part) | ≥2000 Group |
| Power Supply | 220V,50HZ,1000W |
| Dimension | 800mm×600mm×2000mm（L×W×H） |
| Weight | 220kg |
| Mainframe | 1 set |
| Matched Clamps | It is equipped with 5 clamps with eight functions: flat pull, top stop, bottom stop, flat pull, combination of pull head and pull piece, self-locking of pull head, shift of socket and shift of single tooth |
| Computer Interface | On line communication line |
| Sensor Configuration | 2500N，0.1N |
| Operation Software | 1 Pcs (CD) |
| Qualification Certificate | 1 Pcs |
| Product Manuals | 1 Pcs |
1.Zipper top stop strength test.
2.Zipper bottom stop strength test.
3.Zipper flat tensile strength test.
4.Zipper open tail flat tensile strength test.
5.Zipper pull head pull piece combined strength test.
6.Self-locking strength test of zipper pull head.
7.Zip socket displacement strength test.
8.Zipper single tooth displacement strength test.
