（China）YYP-800D Digital Display Shore Hardness Tester
YYP-800D high precision digital display shore/Shore hardness tester (shore D type), it is mainly used for measuring hard rubber, hard plastics and other materials. For example: thermoplastics, hard resins, plastic fan blades, plastic polymer materials, acrylic, Plexiglass, UV glue, fan blades, epoxy resin cured colloids, nylon, ABS, Teflon, composite materials, etc. Comply with ASTM D2240, ISO868, ISO7619, GB/T2411-2008 and other standards.
HTS-800D (Pin size)
(1) Built-in high precision digital displacement sensor, to achieve high precision measurement.
(2) YYP-800D digital display Shore hardness tester has the maximum locking function, can record instantaneous average value, automatic shutdown function.
(3) YYP-800D digital display Shore hardness tester can set the hardness reading time, the timing measurement can be set within 1~20 seconds.
(1) Hardness measurement range: 0-100HD
(2) digital display resolution: 0.1HD
(3) Measurement error: within 20-90HD, error ≤±1HD
(4) Press tip radius: R0.1mm
(5) Diameter of needle pressing shaft: 1.25mm (tip radius R0.1mm)
(6) Elongation of pressure needle: 2.5mm
(7) Press needle tip Angle: 30°
(8) pressure foot diameter: 18mm
(9) Thickness of the tested sample: ≥5mm (up to three layers of samples can be stacked in parallel)
(10) Meet the standards: ISO868, GB/T531.1, ASTM D2240, ISO7619
(11) Sensor: (high- precision digital precision displacement sensor);
(12), pressure needle end force value: 0-44.5N
(13) Timing function: with timing function (time holding function), you can set the specified time locking hardness value.
(14), maximum function: can lock the instantaneous maximum value
(15), average function: can calculate multi-point instantaneous average
(16) Test frame: with four nuts adjustable level calibration hardness tester
(17) Platform diameter: about 100mm
(18) Maximum thickness of measured sample: 40mm (Note: If handheld measurement method is adopted, sample height is unlimited)
(19) Appearance size: ≈167*120*410mm
(20) Weight with test support: about 11kg
