YYP-LH-B Rheometer(Cure Tester)
- Technical Parameters:
1. Temperature range: room temperature ~ 200℃
2. Heating time: ≤10min
3. Temperature resolution: 0 ~ 200℃: 0.01℃
4 .Temperature fluctuation: ≤±0.5℃
5 .Torque measuring range: 0N.m ~ 12N.m
6. Torque display resolution: 0.001N.m(dN.m)
7 .Maximum test time: 120min
8. Swing Angle: ±0.5°(total amplitude is 1°)
9. Mold swing frequency: 1.7Hz±0.1Hz(102r/min±6r/min)
10. Power supply: AC220V±10% 50Hz
11 .Dimensions: 630mm×570mm×1400mm(L×W×H)
12. Net weight: 240kg
The main functions of the control software are introduced
1. Operating software: Chinese software; English software;
2. Unit selection: kgf-cm, lbf-in, N-m, dN-m;
3. Testable data: ML(N.m) minimum torque; MH(N.m) maximum torque; TS1(min) initial curing time; TS2(min) initial curing time; T10, T30, T50, T60, T90 curing time; Vc1, Vc2 vulcanization rate index;
4. Testable curves: vulcanization curve, upper and lower die temperature curve;
5. The time can be modified during the test;
6. Test data can be automatically saved;
7 .Multiple test data and curves can be displayed on a piece of paper, and the value of any point on the curve can be read by clicking the mouse;
8. The experiment is automatically saved, and the historical data can be added together for comparative analysis and printed out.
