（China）YYP225A Printing INK Proofer

Operation Introduce

1. Turn on the machine .
2. Then display the timing of T1 and T2, also display distributing speed and spreading speed.
3. Press “set” key, you will firstly go into distributing mode setting, press up/down key, choose mode one, mode two, mode three setting
4. Then press backward key, you will into distributing speed setting. Press up/down key to choose “low speed, mid speed and high speed.”
5. Press back forward again, you will into the spread speed setting. Press up/down key to choose “low speed, mid speed and high speed.”
6. Press back forward once more, you will into T1 timing setting. Press up/down key to add/minus timing.
7. Press back forward one more time, you will into T2 timing setting. Press up/down key to add/minus timing.
8. Press “exit” key to exit function setting and save all the data’s set.
9. Press “clean” key, you will into cleaning mode. Then press “clean” key one time, you will into close status running. And press “switch” key one time, you will into separate status running. The running won’t be stop until you press “stop/reset” key
10. Press “start” key, the setting of distributing mode will start running and it will stop itself when the program finish running. You can press “stop/reset” key to force the program stop running when unfinished running.
11. When the distributing mode or the cleaning mode is running, press “stop emergency” key, all the running mode will be stop. When stop emergency is unlocked, press stop/reset” key it will go back to the separate status.
12. Press “spread” key, it will begin spreading following the spreading mode we set before. And it will stop itself when finish spreading.