(China)YYT1 Laboratory Fume Hood
Short Description:
I.Material profile:
1. The main side plate, front steel plate, back plate, top plate and lower cabinet body can be made
of 1.0~1.2mm thick steel plate, 2000W imported from Germany
Dynamic CNC laser cutting machine cutting material, bending using automatic CNC bending
machine one at a time bending molding, the surface through epoxy resin powder
Electrostatic line automatic spraying and high temperature curing.
2. The lining plate and the deflector adopts 5mm thick core anti-double special plate with good
anti-corrosion and chemical resistance. The baffle fastener uses PP
High quality material production integrated molding.
3. Move the PP clamp on both sides of the window glass, handle PP into one body, embed 5mm tempered glass, and open the door at 760mm.
Free lifting, sliding door up and down sliding device adopts pulley wire rope structure, stepless
arbitrary stay, sliding door guide device by anti-corrosion polymerization
Made of vinyl chloride.
3. The fixed window frame is made of epoxy resin spraying of steel plate, and 5mm thick tempered glass is embedded in the frame.
4. The table is made of (domestic) solid core physical and chemical board (12.7mm thick) acid and alkali resistance, impact resistance, corrosion resistance, formaldehyde reaches E1 level standards.
5. All the internal connection devices of the connection part need to be hidden and corrosion
resistant, there are no exposed screws, and the external connection devices are resistant
Corrosion of stainless steel parts and non-metallic materials.
6. The exhaust outlet adopts an integrated air hood with the top plate. The diameter of the outlet
is 250mm round hole, and the sleeve is connected to reduce the gas disturbance.
II.Accessories Description:
1. The water is equipped with imported one-time molding PP small cup tank, resistant to acid and alkali and corrosion. The single faucet is constructed of brass and installed in the ventilation
Inside the counter (water is optional, default is desktop faucet, can change other water according to demand).
2. The circuit control panel adopts the LCD panel (the speed can be set and adjusted freely, which can adapt to most similar products on the market, supported
Electric wind valve 6 seconds quick open) 8 key power, set, confirm, lighting, spare, fan, wind valve +\- key. Lighting LED white light quick start type, installed on the top of the fume hood, long service life. The socket is equipped with four 10A 220V five-hole multi-function sockets. The line uses Chint 2.5 square copper core wire.
3. The door hinge of the lower cabinet adopts “DTC brand” 110 degree straight bending hinge, which has high service life and convenient disassembly.
4. The back plate in other lower cabinets is reserved for access Windows to facilitate troubleshooting, and the left and right side panels are reserved for four holes to facilitate installation of Cock and other facilities.
III.Specifications:
|
Cabinet Width(mm) |
1800 |
1500 |
1200 |
|
|
Front Window Operation Width(mm) |
1530 |
1230 |
930 |
|
|
Outside Dimension(L×W×H mm) |
1800×850×2350 |
1500x850x2350 |
1200x850x2350 |
|
|
Inside Dimension(L×W×H mm) |
1530x650x1150 |
1230x650x1150 |
930x650x1150 |
|
|
Working Area Dimension |
1 m2 |
0.8 m2 |
0.6 m2 |
|
|
Maximum Height Of Front Window Opening(mm) |
850 |
|||
|
Outlet Pipe Size |
315mm |
250mm |
250mm |
|
|
Outgoing Pipe Qty |
Optional |
|||
|
Working Area Illumination |
> 400 lux |
|||
|
Noise Standard |
<60dBA |
|||
|
Material |
Major Structure/Diversion System |
Galvanized steel plate with Epoxy powder baking paint on the surface |
||
|
Front Window |
PU steel wire synchronous belt with aluminum alloy synchronous wheel, 14 synchronous steel shaft drive, toughened safety glass |
|||
